Wipcool HT-2 Brazing Torch

Brazing torch with a gas hose connecting the handle to a MAPP gas or propane cylinder, for soldering and brazing copper tube. With MAPP gas, it is suitable for soft soldering tube up to Ø2" and brazing up to Ø1".

z przewodem do butliVersion

1"Max. Cu Ø, brazing (MAPP)

2"Max. Cu Ø, soft soldering (MAPP)

>1982°CFlame temp. (MAPP)

1. What it is used for

The HT-2 is a trigger-ignition torch in which a gas hose connects the handle to a CGA600 connector that screws onto a 400–454 g MAPP gas or propane cylinder. With MAPP gas, the flame temperature exceeds 1,982 °C.

Note: At a low flame setting, the torch tip overheats.

Handle connected to the cylinder by a hose. A gas hose connects the cylinder to the handle, so during brazing you hold only the handle with the burner tube, not the cylinder.
Two flame control valves. You can adjust the flame with the valve on the handle or the valve at the cylinder connector.
Trigger locked in the OFF position. When the trigger switch is in the OFF position, accidentally pressing the trigger does not ignite the torch.

2. In the box

HT-2 Brazing Torch

User manual

3. Technical specifications

Gas type	MAPP, propan
Connection standard	CGA600
Cylinder	Do użycia z butlami 400–454 g
Pressure adjustment	maksymalne ciśnienie gazu 2,59 MPa
Maximum flame temperature	>1982 °C (testowane z gazem MAPP)
Outer carton	20 pcs

Features and equipment

Gas hose between the cylinder connector and the handle
Flame control valve (auxiliary) on the handle
Flame control valve (auxiliary) at the inlet connector
Brass gas regulator
Trigger ignition
ON/OFF trigger switch locking the trigger
Stainless steel or brass tip
CGA600 inlet connector

4. Warranty and documents

24-month warranty

Documents to download

Instrukcja obsługi - HT-1/2/3 (PL)https://wipcool.eu/wp-content/uploads/2024/09/HT-1I2I3-Instrukcja-obslugi.pdf

Where to buy

You can buy Wipcool products from authorised distributors. List of sales outlets: https://wipcool.eu/en/distributors/

Specifications are subject to change without notice.As of 10/2026