Wipcool HT-3 Brazing Torch

Trigger-start torch with a 360° swivel head for brazing and soldering copper tube with MAPP gas or propane. With MAPP gas it is suitable for soldering tube up to Ø2" and brazing tube up to Ø1".

końcówka obrotowa 360°Version

1"Max. Cu tube Ø, brazing (MAPP)

2"Max. Cu tube Ø, soldering (MAPP)

>1982°CFlame temp. (MAPP)

1. What it is used for

The HT-3 is a hand torch with automatic ignition that screws onto a 400–454 g MAPP gas or propane cylinder via a CGA600 connection. The head rotates through 360°, and with MAPP gas the flame temperature exceeds 1,982 °C. Flame size is set with the valve at the connection, and gas pressure is controlled by an internal regulator.

Note: At a low flame setting the torch tip overheats.

360° swivel head. The head rotates through 360°, so you can direct the flame at the joint in various working positions.
Trigger locked in the OFF position. When the trigger switch is set to OFF, accidentally pressing the trigger will not light the torch.

2. In the box

HT-3 Brazing Torch

User manual

3. Technical specifications

Gas type	MAPP, propan
Connection standard	CGA600
Cylinder	Do użycia z butlami 400–454 g
Pressure adjustment	maksymalne ciśnienie gazu 2,59 MPa
Maximum flame temperature	>1982 °C (testowane z gazem MAPP)
Bulk pack	25 pcs

Features and equipment

Automatic ignition in an aluminium housing
360° swivel torch head
Swirl flame
ON/OFF trigger lock switch
Flame control valve
Internal gas regulator
CGA600 inlet connection
Stainless steel or brass tip
Every unit flame-tested

4. Warranty and documents

24-month warranty

Documents to download

Instrukcja obsługi - HT-1/2/3 (PL)https://wipcool.eu/wp-content/uploads/2024/09/HT-1I2I3-Instrukcja-obslugi.pdf

Where to buy

You can buy Wipcool products from authorised distributors. List of sales outlets: https://wipcool.eu/en/distributors/

Specifications are subject to change without notice.As of 10/2026