Wipcool P16 Condensate Pump

Two-piece mini condensate pump with a separate float switch for air conditioners with a cooling capacity of up to 8.8 kW, often used in ducted units. Max. head 10 m, flow up to 16 l/h.

16l/hMax. flow

10mMax. head

do 8,8kWCooling capacity

19dB(A)Noise level at 1 m

1. What it is used for

The P16 is a two-piece mini condensate pump: condensate drains from the drip tray into the float switch with reservoir, and the pump, connected to it by a tube, discharges it to the drain. It lifts water to a head of up to 10 m, with a maximum flow of 16 l/h. The model is designed for air conditioners with a cooling capacity of up to 8.8 kW and is often used in ducted units.

The pump is driven by a brushless motor, and its noise level at a distance of 1 m is 19 dB(A). The pump can be mounted horizontally or vertically, e.g. above a suspended ceiling, behind a wall-mounted unit or in trunking. The built-in safety switch responds to a high water level; when the alarm line is connected to an air conditioner control system that supports this signal, the air conditioner is switched off, reducing the risk of condensate leaks.

Separate float switch at the drip tray. The float switch stays at the drip tray, while the pump can be installed separately, connected to it by a tube up to 1.5 m long.
NC or NO alarm line. The COM alarm line with NC or NO output can be connected to the air conditioner's level switch or to another alarm device.
Operating status shown by LEDs. The green LED lights up during operation and the red LED indicates a high water level, so the pump status is visible on the housing.
Removable float switch reservoir. Pressing the latch releases the float switch reservoir downwards, giving access to the mesh filter.

2. In the box

Cable ties4 × 30 cm and 2 × 10 cm

Connectors2 pcs, 6 mm

Hook-and-loop pads2 pcs, for mounting the pump and float switch

Rubber reducer25 × 16 mm

Rubber elbow connector16 mm

Vent tube

Rubber anti-condensation sleeve

Power and alarm cable

User manual

Optional accessories

Wipcool PTF-80 Trunking Kit · PTF-80

3. Technical specifications

Power supply	230 V
Max. head	10 m
Max. flow	16 l/h
Tank capacity	35 ml
Cooling capacity	8,8 kW
Noise level at 1 m	19 dB (A)
Operating temperature	0–50 °C
Dimensions (L × W × H, mm)	126 × 47 × 53
Unit type	Wall-mounted split, Ducted / cassette
Max. suction lift	2 m
Carton quantity	20 pcs

Features and equipment

Brushless motor
Separate modules: pump and float switch with 35 ml reservoir
Electronic condensate level sensor in the float switch
Built-in safety switch
NC/COM/NO alarm line
LEDs: green - operation, red - alarm
Mesh filter in the float switch reservoir
Removable float switch reservoir (by pressing the latch)
Float switch venting
Horizontal or vertical pump mounting
Outlet for 6 × 9 mm hose
IPX4 protection rating
Compatible accessory: Wipcool PTF-80 trunking kit

4. Applications

Fan coil units in air conditioning

The pump removes condensate from fan coil units in central air conditioning systems.

5. Warranty and documents

36-month warranty

Documents to download

Instrukcja obsługi - P16/P32 (PL)https://wipcool.eu/wp-content/uploads/2024/08/Instrukcja-obslugi-P16-P32-3.pdf
Deklaracja zgodności - P16/ P32, P18/P36 (EN)https://wipcool.eu/wp-content/uploads/2024/08/Deklaracja-zgodnosci-P16-P18-P32-P36-1.pdf

Where to buy

You can buy Wipcool products from authorised distributors. List of sales outlets: https://wipcool.eu/en/distributors/

Specifications are subject to change without notice.As of 10/2026