No cable, no problem - the Wipcool C10B pressure washer in the HVAC installer's daily work
Cleaning a coil with no access to a socket or tap is everyday work for a service engineer. The C10B cordless pressure washer draws water from a bucket and runs on an 18 V battery, so all you need to do is carry it to the outdoor unit.
What the C10B is for
The C10B is a cordless pressure washer for cleaning domestic air conditioners and small refrigeration equipment:
- it runs on an 18 V battery: AEG batteries fit directly, and with the adapters included in the kit, Makita and Bosch Professional batteries too,
- it has two modes: 3–5 bar for the indoor unit and 7–10 bar for the outdoor unit,
- it draws water by itself from a bucket or tank, so it does not need a tap,
- it weighs 3.7 kg and fits in the boot together with the hoses.
Working without a socket
There is no need to run an extension lead across the garden or ask the customer for access to a socket. On a 4.0 Ah battery the pressure washer runs for 50 to 120 minutes, which is usually enough for several units on a single job.
Performance and equipment
A flow rate of up to 4 l/min is enough to rinse a coil. The inlet hose is 2.5 m and the outlet hose 5 m, and both wind onto reels on the housing, which also has storage for the gun and the extension lance.
Simple operation
You change the pressure with a single switch on the housing, and the regulator with automatic start/stop runs the pump when you pull the gun trigger.
Clean fins, fewer callbacks
The 3–5 bar mode cleans the coil fins without bending them. The customer sees the result: the air conditioner cools better, does not smell musty and uses less electricity, and the service engineer has fewer warranty callbacks.
Do not add chemicals directly to the water in the bucket the pressure washer draws from.
You can buy the C10B pressure washer from authorised distributors.
