Skip to content
Wipcool - Your key to comfort
Contact
HomeHVAC/R ToolsTube and Pipe ToolsWipcool PPC-42 PVC Pipe CutterUser manual
← PPC-42← Downloads
iMachine translation: may contain inaccuracies. The Polish version is binding.
WipcoolDistribution PL · 4REF

Wipcool PPC-42 user manual

PVC Pipe Cutter

Read the entire manual before first use. Keep it for as long as you use the device.

Wipcool PPC-42 PVC Pipe Cutter
1

Wipcool PPC-42 user manual

The Wipcool PPC-42 PVC Pipe Cutter is designed for manually cutting PVC, PPR, PE and PEX pipes, multilayer aluminium and plastic pipes, and rubber hoses.

The user manual is an integral part of the product. Please read this manual carefully and follow all instructions strictly.

2

Symbols and conventions

  1. 01Notice - risk of damage to the tool or an incorrect result.
3

Safety information

  • ■Hold the cutter by the handles; do not touch the cutting edge or put your fingers between the blade and the pipe.
  • ■Before use, check the tool for visible damage. Do not use a damaged cutter.
!
Caution
Do not cut steel pipes or electrical cables, as this may cause serious damage to the cutter.
4

Technical specifications

ParameterValue
ModelPPC-42
BladeSK5 steel with Teflon coating
MechanismRatchet
Cutting diameterUp to 42 mm; rigid plastic pipes: from 3 mm
Dimensions210 × 90 mm
5

How to use

In winter, warm the pipe in lukewarm water before cutting.

Cutting the pipe

1
Step 1
Figure 1. Cutter open. Press the opening button with your thumb.
2
Step 2
Figure 2. Blade starting to close. Insert the pipe into the cutter and support it securely.
3
Step 3
Figure 3. Blade closing further. Squeeze the handles until the pipe is cut through. Rotate flexible PVC pipe while squeezing the handles.
6

Maintenance

After cutting

Remove debris from the blade and protect it with anti-corrosion oil, then close the cutter.

Cleaning and storage

Clean the body and handles with a soft, dry cloth. Store the cutter closed in a dry place, out of the reach of children and unauthorised persons.

Replacing the blade

  1. 01When the blade is blunt, undo the two retaining screws on both sides of the blade and remove the blade.
  2. 02Fit a new blade of the same type and tighten the retaining screws.
7

Service and documents

Before submitting a service request, prepare:

  • ■Model - found on the product label and on the invoice.
  • ■Serial number - if there is none, provide the production number (e.g. 11/2025), usually found on the underside of the product.
  • ■Proof of purchase - an invoice or receipt from an authorised distributor.
  • ■Description of the fault - what is happening, when it started and under what conditions.

You can submit a service request at wipcool.pl/serwis. You will also find the warranty terms there.

4REF sp. z o.o. · ul. Andersa 38, 15-113 Białystok · bok [at] wipcool.plPPC-42 · vWydanie 31.10.2026