Wipcool R2 user manual

Wipcool R2 user manual

The Wipcool R2 manual oil charging pump is used to pump refrigeration oil into a pressurised system. It allows oil to be topped up without shutting down the system.

The user manual is an integral part of the product. Please read this manual carefully and follow all instructions closely.

General information

Wipcool products are designed for professional use by qualified air conditioning and refrigeration technicians. As the manufacturer, Wipcool stipulates that our products should only be operated by people with the appropriate qualifications and training.

• ■Observe all local safety regulations and general safety standards when using the Wipcool R2 oil charging pump.
• ■The user manual should be kept near the product so that personnel can access it easily at all times.
• ■Before use, qualified personnel should read the user manual carefully and understand all the instructions it contains.
• ■The manufacturer accepts no liability for any damage resulting from improper use, failure to follow the user manual, lack of personnel qualifications or any unauthorised modifications to the product.
• ■The general terms and conditions of sale in the sales documents apply.

Symbols and conventions

Technical specifications

Device diagram

The mounting mechanism automatically adapts to standard openings on 1 gal, 2.5 gal and 5 gal oil containers. The pump is designed to prevent oil from flowing back.

Contents

• ■R2 pump.
• ■Suction tube.
• ■Connectors for connecting the pump to the compressor.
• ■1.5 m high-pressure discharge hose.
• ■User manual.

After unpacking, check that the contents are complete and in good condition. Report any missing or damaged items to the seller.

Transport and storage

• ■Transport the pump in its original packaging.
• ■Store it in a dry place, away from direct sunlight and heat sources.
• ■The storage temperature should be -20–+60 °C.

Connection

1. 01Remove the pump and discharge hose from the packaging. Connect one end of the discharge hose to the pump and tighten the connection.
2. 02Insert the suction tube into the oil container until its end rests on the bottom. Position the suction tube and secure it to the pump connection using a spanner.
3. 03Fill the discharge hose with oil to remove the air from it. Then connect the other end of the hose to the closed compressor service valve and tighten the connection.

Instructions for use

1. 01Press down on the pump base with your foot to prevent it from sliding and turning, and start moving the handle.
2. 02Open the compressor service valve and pump the refrigeration oil slowly and evenly. Push the pump handle through its full stroke each time. Oil is pumped as the handle moves down.
3. 03After pumping in the required amount of oil, close the compressor service valve, then stop moving the handle.
4. 04Disconnect the discharge hose from the compressor.

Service and documents

Before submitting a service request, prepare:

• ■Model - found on the product label and on the invoice.
• ■Serial number - if there is none, provide the production number (e.g. 11/2025), usually found on the underside of the product.
• ■Proof of purchase - an invoice or receipt from an authorised distributor.
• ■Description of the fault - what is happening, when it started and under what conditions.

You can submit a service request at wipcool.pl/serwis. You will also find the warranty terms there.