Skip to content
Condenser Misting Systems and Condensate Atomisers
P30J

Wipcool P30J Condenser Misting System

Water mist system for cooling the coil of air conditioning outdoor units and refrigeration equipment operating at high ambient temperatures. Supplied from the mains water at 2–8 bar.

  • Two control modes
  • 5 adjustable nozzles
  • Water pressure 2–8 bar
  • IP54 protection rating
  • 24-month warranty
  • Service by the distributor in the country of purchase
Key parameters
18–53l/h
Max. flow (5 nozzles)
2–8bar
Supply water pressure
IP54
Protection rating
Net list price
Request a quote
Request a quote
Where to buy

The P30J is a water mist system for air conditioning outdoor units and refrigeration equipment operating at high ambient temperatures. A temperature sensor fitted at the coil fins starts misting once the start temperature is exceeded and stops it when the temperature falls to the stop value. Mains water passes through a pre-filter to 5 nozzles, which spray it onto the coil. It protects the unit from overheating during prolonged hot weather and reduces the load on the compressor. It suits air-cooled condensers in air conditioning and refrigeration: from air conditioners, through VRF and VRV systems and chillers, to condensing units in data centres, warehouses and production plants.

The misting system requires a water pressure of 2–8 bar, with water consumption of 18–53 l/h. It is wall-mounted next to the unit and requires no modifications to the air conditioner. The housing is rated IP54.

Adjustable start and stop thresholds
You can set the misting start and stop temperatures with the buttons on the panel.
Two control modes
In dual control mode, misting starts above the temperature threshold only when the current sensor confirms that the air conditioner is running; in single mode, temperature alone decides.
Water consumption depends on pressure
At 2 bar, five nozzles use 18 l/h, at 4 bar - 33 l/h, at 6 bar - 44 l/h and at 8 bar - 53 l/h.
Pre-filter protects the nozzles
The pre-filter on the water inlet traps sand and deposits that could clog the nozzles.

In the box

  • Pre-filter
    1 pc
  • Rotating nozzle with tee
    4 pcs, 20 cm
  • Two-way rotating nozzle
    1 pc, 20 cm
  • Outlet hose
    1 pc, 5 m
  • Connector with 1/2" PT female thread
    1 pc
  • 1/2" garden hose quick-release coupling
    1 pc
  • Connector for 20 mm plastic pipe
    1 pc
  • Tap connector with washer
    1 pc
  • Mounting plate
    1 pc
  • Wall plugs
    2 pcs
  • Screws
    2 pcs
  • User manual
    1 pc

Other models in this category