Mini Condensate Pumps
P12CT
Wipcool P12CT Condensate Pump
Kit for wall-mounted units with a cooling capacity of up to 8.8 kW: P12C corner condensate pump, corner elbow, 800 mm cut-to-length trunking and wall flange.
- P12C pump included
- Left or right installation
- 800 mm cut-to-length trunking
- NC/COM alarm line
- 24-month warranty
- Warranty service in Poland
- Service by the distributor in the country of purchase
Key parameters
12l/h
Max. flow
7m
Max. head
do 8,8kW
AC cooling capacity
19dB(A)
Noise level at 1 m
The P12CT is a complete kit for installation alongside a wall-mounted air conditioner: P12C condensate pump, corner elbow, 800 mm trunking and wall flange. The elbow with the pump can be fitted on the left or right side of the indoor unit, and the trunking can be cut to length on site. The trunking components are made of reinforced, rigid, impact-resistant PVC.
The P12C pump lifts condensate up to 7 m, and the kit is designed for air conditioners with a cooling capacity of up to 8.8 kW.
Pump accessible under the cover
The removable elbow cover gives access to the pump, so replacement or maintenance does not require removing the entire trunking.
Tubes and cables in one trunking
The trunking houses the air conditioner tubes and cables, keeping the installation at the indoor unit neat.
NC/COM alarm line
The built-in safety switch responds to an alarm water level in the reservoir. When the NC/COM alarm line is connected to an air conditioner control system that supports this signal, the air conditioner is switched off, reducing the risk of overflow.
In the box
- P12C condensate pump
- Corner elbowWith removable cover
- TrunkingLength 800 mm
- Wall flange
- Cable ties4 × 30 cm, 2 × 10 cm
- Hook-and-loop strap for pump mounting2 pcs
- Wall plugs2 pcs
- Screws2 pcs
- Rubber reducer25 × 16 mm
- Rubber connector16 mm
- Metal bracket
- Rubber sleeveAnti-vibration and anti-condensation
- Condensate drain pipe
- Power and alarm cable
- User manual
Technical specifications
| Power supply | 230 V |
| Max. head | 7 m |
| Max. flow | 12 l/h |
| Tank capacity | 45 ml |
| Cooling capacity | 8,8 kW |
| Noise level at 1 m | 19 dB (A) |
| Operating temperature | 0–50 °C |
| Dimensions (L × W × H, mm) | 132,4 × 63,4 × 132,4 |
| Unit type | Wall-mounted split |
| Power consumption | 3 W |
| Protection rating | IPX4 |
| Carton quantity | 10 pcs |
Features and equipment
Diaphragm pump
Hall effect water level sensors
Four-core power and signal cable with nut-locked connector
Removable reservoir with lock and mesh filter
Pump mounted with vibration-damping hook-and-loop strap
CAUTION
This equipment must only be operated by qualified personnel. Read the user manual before first use.
Documents in: EN
