Mini Condensate Pumps
P32
Wipcool P32 Condensate Pump
Two-piece mini condensate pump with a separate float switch and filter, for ducted and wall-mounted air conditioners with a cooling capacity of up to 13.2 kW. Max. head 10 m, flow rate up to 32 l/h.
- Separate float switch with filter
- Brushless motor
- NC/COM/NO alarm contact
- Horizontal or vertical mounting
- 36-month warranty
- Warranty service in Poland
- Service by the distributor in the country of purchase
Key parameters
32l/h
Max. flow rate
10m
Max. head
do 13,2kW
Cooling capacity
21dB(A)
Sound level at 1 m
The Wipcool P32 is a mini condensate pump made up of two modules. Condensate from the drip tray drains into the float switch with its reservoir and mesh filter, and a separate pump module with a brushless motor discharges it to a head of up to 10 m. The maximum flow rate is 32 l/h and decreases as the head increases. The pump fits above a suspended ceiling, behind the indoor unit of a wall-mounted air conditioner or in plastic trunking.
NC/COM/NO alarm contact
When the NC/COM/NO alarm contact is connected to the control system of an air conditioner that supports this signal, the air conditioner is switched off at a high water level. If the air conditioner has no such input, you can connect the contact to another alarm device.
LED shows operation and alarm
The LED lights green when the pump is operating correctly and red when the water level triggers an alarm.
Horizontal or vertical pump mounting
The pump module can operate horizontally, e.g. inside a wall-mounted air conditioner, or vertically where space is limited.
In the box
- Cable ties4 × 30 cm and 2 × 10 cm
- Joiners2 pcs, 6 mm
- Hook-and-loop pads2 pcs, for mounting the pump and float switch
- Rubber reducer25 × 16 mm
- Rubber elbow connector16 mm
- Vent tube
- Anti-condensation rubber sleeve
- Power and alarm cable
- User manual
Technical specifications
| Power supply | 230 V |
| Max. head | 10 m |
| Max. flow | 32 l/h |
| Tank capacity | 35 ml |
| Cooling capacity | 13,2 kW |
| Noise level at 1 m | 21 dB (A) |
| Operating temperature | 0–50 °C |
| Dimensions (L × W × H, mm) | 126 × 47 × 35 |
| Unit type | Wall-mounted split, Ducted / cassette |
| Max. suction lift | 2 m |
| Carton quantity | 20 pcs |
Features and equipment
Brushless motor
Electronic condensate level sensor in the float switch
Built-in safety switch to prevent overflow
NC/COM/NO alarm contact
LED: green - operation, red - alarm
Separate float switch with removable reservoir and mesh filter
Float switch vent
Horizontal or vertical pump mounting
Outlet for 6 × 9 mm hose
IPX4 protection rating
For indoor use
Compatible accessory: Wipcool PTF-80 trunking kit
CAUTION
This equipment must only be operated by qualified personnel. Read the user manual before first use.
Documents in: EN
